Tips on Extending the Life of an Ignition wire

Tips on Extending the Life of an Ignition wire




The ignition wire is an important part of a car. It converts strength of a few volts from the battery into as much as 25kv which is basic to create a spark to ignite fuel. Optimal functionality of the ignition wire is affected by multiple factors. You can extend the life of the wire up to 80,000 km by following a few tips. Read this article to know more about how you can extend the life of the ignition wire.

Battery should be well charged

Make sure to charge the battery optimally. If it is below optimal level, the workload on the wire is doubtful to create sufficient spark to ignite fuel.

Check for oil leaks

Check if there is any damaged sealant. This condition may rule to the leakage of oil. Often, oil damages the insulation in wires and exposes them. This causes sparks and rules out wire ignition.

Prevent formation of moisture

Look out for any breakages where the ignition wire is located. Make sure you seal such fractures with an adhesive. This prevents moisture from entering into the system.

Avoid engine overheating

In summer, the climate is hot and you may like to sit in your car with the air-conditioner on. Running the air-conditioner puts excess workload on the engine. The engine part gets hotter and hotter. Unless the heat is facilitated to move out from the engine, it might cause excess heat. This heat may reduce the durability of the ignition wire.

Limit vibrations

sometimes, you may get a knocking noise that is uncommon. Such noise is an indication of damage of the part where it comes from. If the noise becomes frequent, it damages the housing. It might also rule to short-circuit in the wire and ultimately failure.

Maintenance of spark plugs

Over time, spark plugs use because of workload. Get the spark plugs replaced as recommended by the manufacturer. While replacing spark plugs, see that the cylinder head threads and spark plug threads are free from moisture, dust and debris. Make sure to follow maintenance of the wire as recommended by the manufacturer.

Proper maintenance of engine parts

It is important that you take proper care of the engine parts. For this, you need to use engine oil of the right grade and appropriate fuel. You should also replace air filters, fuel injection pump, spark plugs and use right level of coolant (it should be between ‘high’ and ‘low’).

Make sure to replace the belts (in driving the pulleys) in the engine (replace them at 80,000 km), and get the means serviced by expert professionals. Also, for optimal fuel economy, inflate tires to pressure recommended by the manufacturer.




leave your comment

Top